• Getting Started Pure IP-PBX KX-NCP500 Model No. KX-NCP1000 Thank you for purchasing a Panasonic Pure IP-PBX. Discografias completas en un link. Please read this manual carefully before using this product and save this manual for future use. KX-NCP500/KX-NCP1000: PBMPR Software File Version 2.0000 or later. • Table of Contents Table of Contents 1 Before Installation.3 Safety Notices..4 Unpacking..4 2 Installation..5 Installing the DSP Card..6 Inserting the SD Memory Card to the IPCMPR Card.9 Frame Earth Connection..9 Connecting to the LAN..10 2.4.1 Connecting the IPCMPR Card to the LAN.10 2.4.2. • Section 1 Before Installation Getting Started.

KX-NS Unified Web Maintenance Console is a program developed by Panasonic. The most used version is 6.00.0.4_r1, with over 98% of all installations currently using this version. The software is designed to connect to the Internet and adds a Windows Firewall exception in order to do so without being interfered with.

• 1.2 Unpacking 1.1 Safety Notices Please observe the safety notices in this manual in order to avoid danger to users or other people, and prevent damage to property. The notices are classified as follows, according to the severity of injury or damage: WARNING This notice means that misuse could result in death or serious injury. • Section 2 Installation Getting Started. • 2.1 Installing the DSP Card 2.1 Installing the DSP Card Removing the IPCMPR Card from the PBX Turn the 2 screws anticlockwise to loosen them. Screws Pull the card from the cabinet to remove it.

Getting Started. • 2.1 Installing the DSP Card Installing the DSP Card Depending on the number and the type of IP trunks and IP telephones you wish to use, required activation keys are determined, and one of the DSP4, DSP16, or DSP64 card is selected to be installed. DSP4: 4-channel DSP (Digital Signal Processor) card with a 4-Channel IP Trunk activation key and an 8-Channel IP Proprietary Telephone activation key preinstalled. • Installing the IPCMPR Card in the PBX Install the IPCMPR card in the IPCMPR card slot of the PBX. Note The illustrations of the PBX shown in the installation procedure are based on the KX-NCP500.

Insert the card along the guide rails. Guide Rail Turn the 2 screws clockwise to fix the card in place. • 2.2 Inserting the SD Memory Card to the IPCMPR Card The SD Memory Card contains software for all the processes of the PBX and all the customer data. The SD Memory Card must be inserted before startup. Example: KX-NCP500 IPCMPR Card SD Memory Card CAUTION Do not remove the SD Memory Card while power is supplied to the PBX. • 2.4.1 Connecting the IPCMPR Card to the LAN CAUTION For earthing wire, green-and-yellow insulation is required, and the cross-sectional area of the conductor must be more than 0.75 mm or 18 AWG. 2.4 Connecting to the LAN 2.4.1 Connecting the IPCMPR Card to the LAN Refer to the following procedure to connect the IPCMPR card to the LAN.

• 2.4.1 Connecting the IPCMPR Card to the LAN Connecting the IPCMPR card to a switching hub Connect the cable to the LAN port of the IPCMPR card. Connect the other end of the cable to the switching hub.

Router Switching Hub LAN Port Switching Hub Ethernet Straight Cable. • 2.4.2 Connecting the IP Telephones to the LAN 2.4.2 Connecting the IP Telephones to the LAN When an IP telephone is connected to the LAN and power is supplied for the first time, you will be prompted to set network parameters. The network parameters must be set for the IP telephone before it can be used. Refer to '4.3 Programming the Virtual Extension Card and IP Telephones'. • 2.4.2 Connecting the IP Telephones to the LAN Connecting an AC Adaptor to an IP Telephone IP-PTs and some SIP Extensions comply with the IEEE 802.3af Power-over-Ethernet (PoE) standard. If PoE is available on your network, these IP telephones can receive the necessary power supply from the network through the network cable. Contoh program sms gateway vb6 runtime windows.